⟁ Maine Well Data field records · 2026 survey

Maine Well Data › Piscataquis County › Milo (04463)

Milo, ME (04463): well depth, water level & drilling cost

✓ 130 Maine Geological Survey records · Piscataquis County

202 ftmedian well depth
150 ft–260 fttypical depth range
16 ftmedian static water level
7 gpmmedian yield (126 tests)

Pull every recorded well near a Milo (04463) address — $49

How deep are wells in and around Milo (04463), Maine?

The median drilled well depth in and around Milo (04463) is 202 ft, based on 130 wells with recorded depths in the state Maine Geological Survey database. Half fall between 150 ft and 260 ft; 90% are shallower than 324 ft.

How much does it cost to drill a well in and around Milo (04463)?

Applying published per-foot rates to the local median depth of 202 ft: drilling and casing alone typically runs $5,050–$13,130; a complete system including pump, pressure tank, and hookup typically runs $12,120–$20,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milo (04463)?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–35 ft), from 9 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 10 100–150 ft 22 150–200 ft 20 200–300 ft 56 300–400 ft 18 400–600 ft 4 600+ ft 0
Looking at a specific property in Milo (04463)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milo (04463)

Free. Goes to licensed drillers working Piscataquis County.

Part of Piscataquis County well records.

Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.