Maine Well Data › Hancock County › Harborside (04642)
Harborside, ME (04642): well depth, water level & drilling cost
✓ 148 Maine Geological Survey records · Hancock County
Pull every recorded well near a Harborside (04642) address — $49
How deep are wells in and around Harborside (04642), Maine?
The median drilled well depth in and around Harborside (04642) is 200 ft, based on 148 wells with recorded depths in the state Maine Geological Survey database. Half fall between 130 ft and 286 ft; 90% are shallower than 330 ft.
How much does it cost to drill a well in and around Harborside (04642)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Harborside (04642)?
The median static water level is 15 ft below ground surface (middle half of wells: 9 ft–18 ft), from 6 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hancock County.
Part of Hancock County well records.
Method: medians computed from Maine Geological Survey records (Maine Geological Survey well database, excluding test, observation and monitoring wells; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.